DXB Solutions LLC supplies the Ebara CDXM 90/10 pump in UAE for water supply, pressure boosting, irrigation, washing systems, water treatment, cooling systems and general clean-water transfer applications.
The Ebara CDXM 90/10 is a compact, close-coupled single-stage centrifugal pump from the Ebara CDX Series. The CDX hydraulic section uses AISI 304 stainless steel, while the “M” designation identifies the single-phase version. EBARA lists the CDX family for building services, agriculture and industrial water applications
Ebara CDXM 90/10 Stainless Steel Pump
The Ebara CDXM 90/10 uses a single closed impeller and monoblock construction with an extended motor shaft. EBARA describes the CDX as a single-stage centrifugal pump with an AISI 304 stainless-steel hydraulic construction.
The compact design makes the CDXM 90/10 suitable for installations requiring a relatively small centrifugal pump for clean-water circulation, transfer and pressure applications.
EBARA technical literature for this version lists the CDXM 90/10 at 0.75 kW / 1 HP. Note that EBARA catalogues from different revisions/markets can show revised motor data, so the exact product code/nameplate should be checked when quoting a unit.
Ebara CDXM 90/10 for Pressure Boosting
The Ebara CDXM 90/10 can be used for suitable domestic and commercial pressure-boosting applications where its hydraulic performance matches the required duty.
A typical system may include:
Water Tank → Ebara CDXM 90/10 → Non-Return Valve → Pressure Vessel & Controls → Water Distribution
The pressure vessel and control arrangement should be selected according to the required system operation.
Ebara CDXM 90/10 for Water Supply
The pump can be considered for clean-water distribution and transfer applications such as:
- Water tank transfer
- Building water supply
- Pressure boosting
- General clean-water circulation
- Washing systems
- Water-treatment equipment
The final selection should be based on the required flow rate and total dynamic head.
Ebara CDXM 90/10 for Irrigation
EBARA identifies small-scale irrigation among applications for the CDX family.
For irrigation selection, calculate:
Elevation + Pipe Friction + Required Outlet Pressure = Total Dynamic Head
Then compare the calculated flow and head against the CDXM 90/10 performance curve.
Ebara CDXM 90/10 for Cooling & Water Treatment
The CDX range can also be used in suitable water-treatment, cooling and general industrial water-transfer systems, provided the liquid is compatible with the pump materials and operating limits.
Although the pump uses stainless-steel hydraulic components, do not advertise it as universally suitable for seawater or aggressive chemicals. Material compatibility must be checked for the actual liquid.
Ebara CDXM 90/10 Pump Supplier in UAE
DXB Solutions LLC supplies Ebara CDXM 90/10 centrifugal pumps in Dubai and across the UAE for water supply, pressure boosting, irrigation, washing and suitable commercial and industrial clean-water applications.
Related Products