DXB Solutions LLC supplies the Ebara CDXM 120/07 pump in UAE for water supply, pressure boosting, irrigation, washing systems, cooling applications, water treatment and general clean-water transfer.
The Ebara CDXM 120/07 is a compact single-phase, single-impeller centrifugal pump from the Ebara CDX Series. Its hydraulic components are manufactured primarily from AISI 304 stainless steel, providing a compact solution for compatible clean-water and general water-transfer applications. EBARA’s technical documentation identifies the CDXM 120/07 as the single-phase counterpart of the CDX 120/07.

Ebara CDXM 120/07 Stainless Steel Pump

The CDXM 120/07 uses a single centrifugal impeller to transfer water while providing a relatively high flow rate for its compact motor size.

The model is particularly useful where single-phase electrical supply is available and the application requires moderate pressure with greater flow than some of the smaller CDX models.

Its compact monoblock construction makes it suitable for building services, irrigation, water-treatment equipment, washing and general water-transfer installations.

Ebara CDXM 120/07 for Water Supply

The Ebara CDXM 120/07 can be used for suitable clean-water supply and transfer applications where its flow and head characteristics match the system requirement.

Typical applications include water tank transfer, building water supply, washing systems, water circulation and general clean-water transfer.

Ebara CDXM 120/07 for Pressure Boosting

The pump can also be incorporated into suitable pressure-boosting systems.

A typical arrangement may include:

Water Tank → Ebara CDXM 120/07 → Non-Return Valve → Pressure Vessel & Controls → Water Distribution

The pressure vessel, pressure switch/controller and operating pressure should be selected according to the required system duty.

Ebara CDXM 120/07 for Irrigation

The CDXM 120/07’s combination of moderate head and comparatively higher flow makes it suitable for certain garden and small-scale irrigation applications.

Pump selection should be based on:

Required Flow + Elevation + Pipe Friction Loss + Required Outlet Pressure

The resulting duty point should then be checked against the manufacturer’s performance curve.

Stainless Steel Hydraulic Construction

The CDX 120/07 construction data lists AISI 304 for components including the casing, casing cover and impeller in the standard configuration, with other material variants available within the series.

Ebara CDXM 120/07 Pump Supplier in UAE

DXB Solutions LLC supplies Ebara CDXM 120/07 centrifugal pumps in Dubai and across the UAE for water supply, pressure boosting, irrigation, washing and suitable commercial and industrial water applications.

Related Products