DXB Solutions LLC supplies the Ebara CDXM 120/12 pump in UAE for water supply, pressure boosting, irrigation, washing systems, water treatment and suitable residential, commercial and industrial water-transfer applications.
The Ebara CDXM 120/12 belongs to Ebara’s CDX range of close-coupled, single-impeller centrifugal pumps. The CDXM designation is the single-phase version, making it suitable for installations where single-phase electrical power is available.
Ebara CDXM 120/12 Stainless Steel Centrifugal Pump
The Ebara CDXM 120/12 is designed to provide a combination of good flow capacity and higher head than the CDXM 120/07.
Its compact centrifugal design makes it suitable for clean-water applications where dependable water transfer and pressure are required.
The CDX series uses stainless-steel hydraulic components, making it suitable for many compatible clean-water applications in buildings, irrigation systems and general water services.
The CDXM 120/07 uses a single centrifugal impeller to transfer water while providing a relatively high flow rate for its compact motor size.
Ebara CDXM 120/12 Performance
The CDXM 120/12 is designed for applications requiring a balance between flow and pressure.
As with all centrifugal pumps, available head changes with flow:
Lower Flow → Higher Available Head
Higher Flow → Lower Available Head
The correct operating point should therefore be selected from the Ebara performance curve rather than from maximum flow or maximum head alone.
This is particularly important when the pump is used for pressure boosting or irrigation.
Ebara CDXM 120/12 for Water Supply
The Ebara CDXM 120/12 can be used for suitable clean-water supply and transfer applications including:
- Building water supply
- Water tank transfer
- Pressure boosting
- Irrigation
- Washing systems
- Water treatment
- Cooling-water applications
- General clean-water circulation
Final pump selection should be based on the required flow and total dynamic head (TDH).
Ebara CDXM 120/12 for Pressure Boosting
The Ebara CDXM 120/12 can be incorporated into a pressure-boosting system where its hydraulic performance matches the building requirement.
A typical arrangement is:
Water Tank → Ebara CDXM 120/12 → Non-Return Valve → Pressure Vessel & Controls → Building Water Supply
For automatic operation, the pump may be combined with an appropriate pressure controller, pressure switch, pressure vessel or other control arrangement depending on the system design.
Ebara CDXM 120/12 for Irrigation
The CDXM 120/12 can also be considered for suitable garden and irrigation water systems.
When selecting the pump, calculate:
Static Height + Pipe Friction Loss + Required Outlet Pressure = Total Dynamic Head
The required irrigation flow and calculated TDH should then be checked against the manufacturer’s pump curve.
Stainless Steel Construction
The Ebara CDX range uses stainless-steel hydraulic construction, providing good corrosion resistance for many compatible water applications.
However, stainless-steel construction does not automatically make the CDXM 120/12 suitable for seawater, highly chlorinated water or aggressive chemicals. Material and mechanical-seal compatibility should be checked for the actual pumped liquid.
Related Products