DXB Solutions LLC supplies the Ebara CDXM 120/20 pump in UAE for water supply, pressure boosting, irrigation, washing systems, water treatment and suitable commercial and industrial clean-water applications.
The Ebara CDXM 120/20 is a single-phase, single-impeller centrifugal pump from the Ebara CDX series. The CDX range combines compact close-coupled construction with stainless-steel hydraulics for compatible water applications.

Ebara CDXM 120/20 Stainless Steel Centrifugal Pump

The CDXM 120/20 is designed for applications requiring a combination of moderate flow and comparatively higher pressure within the CDX 120 range.

It can be considered for building water supply, pressure boosting, irrigation, washing equipment and general clean-water transfer where the required operating point falls within the pump performance curve.

Ebara CDXM 120/20 Technical Specifications

EBARA’s 50 Hz technical data lists the following key specifications. One point worth noting is that EBARA catalogue revisions differ: an older selection chart lists 1.5 kW / 2 HP, while a newer motor-data revision lists the single-phase CDXM 120/20 at 1.8 kW. For your website, I would verify the nameplate/product code of the UAE stock you actually supply before putting motor power in the page title.

Ebara CDXM 120/20 for Pressure Boosting

The Ebara CDXM 120/20 can be considered for pressure-boosting applications where its flow and head match the required system duty.

A typical arrangement may be:

Water Tank → Ebara CDXM 120/20 → Non-Return Valve → Pressure Vessel & Controls → Water Distribution

Depending on the application, the pump can be integrated with a pressure vessel, pressure switch/controller or suitable variable-speed control arrangement.

Ebara CDXM 120/20 for Water Supply

The CDXM 120/20 can be used for compatible clean-water applications such as:

• Building water supply
• Water transfer
• Pressure boosting
• Irrigation
• Washing systems
• Water treatment
• Cooling-water circulation
• General commercial water systems

Selection should always be based on the required flow rate and total dynamic head.

Ebara CDXM 120/20 for Irrigation

For suitable irrigation applications, the CDXM 120/20 provides higher available head than the smaller CDXM 120/07 and 120/12 models.

For pump selection, calculate:

Static Height + Pipe Friction Loss + Required Outlet Pressure = Total Dynamic Head

The resulting flow and head requirement can then be checked against the CDXM 120/20 performance curve.

Stainless Steel Hydraulic Construction

The Ebara CDX family uses stainless-steel hydraulic construction, making these pumps suitable for many compatible clean-water applications.

Ebara CDXM 120/20 Pump Supplier in UAE

DXB Solutions LLC supplies Ebara CDXM 120/20 centrifugal pumps in Dubai and across the UAE for water supply, pressure boosting, irrigation and suitable commercial and industrial applications.

Related Products