DXB Solutions LLC supplies the Lowara BGM3 self-priming pump in UAE for water distribution, pressure boosting, irrigation, rainwater collection, washing systems and suitable residential, commercial and light-industrial water applications.
The Lowara BGM3 is a single-phase self-priming centrifugal pump from the Lowara BG Series. The current Xylem 50 Hz technical catalogue lists the BGM3 with a 0.55 kW motor, 220–240 V single-phase supply and self-priming hydraulic design.
Lowara BGM3 Pump
The Lowara BGM3 is designed for applications where water needs to be drawn from a source and transferred or pressurized.
The BG Series incorporates a built-in ejector arrangement for self-priming operation. This makes the BGM3 useful where the pump is installed above the water source, provided the installation remains within the manufacturer’s suction limitations.
Xylem identifies water distribution, pressure boosting, irrigation, washing, rainwater collection and washing equipment among the applications for the BG range.
Lowara BGM3 Stainless Steel Construction
The BG Series uses pressed stainless-steel construction. Xylem lists the pump body as AISI 304 stainless steel for the applicable BG/BGM range.
This construction makes the pump suitable for compatible clean-water applications while providing a compact solution for domestic, agricultural and commercial water systems.
Lowara BGM3 for Pressure Boosting
The Lowara BGM3 can be used for suitable water-pressure boosting applications where its flow and head characteristics match the required system duty.
When combined with correctly selected controls and a pressure vessel, it can form part of an automatic pressure-boosting arrangement.
The pump should be selected from its performance curve rather than simply according to its 0.55 kW motor rating.
Lowara BGM3 for Irrigation
The BGM3 can also be used for suitable garden and irrigation applications.
The required pump duty should account for:
Suction lift + elevation + pipe friction + required irrigation pressure = Total Dynamic Head
The resulting flow and head should then be compared with the BGM3 performance curve.
Lowara BGM3 for Water Transfer
The self-priming configuration makes the BGM3 suitable for selected water-transfer applications where the pump is installed above the water source.
Applications can include:
Water tanks • Rainwater collection • Irrigation tanks • General clean-water transfer • Washing systems
The suction pipe should be properly sized and airtight for reliable self-priming operation.
Lowara BGM3 Suction Lift
The BG Series technical data states a maximum total lift of 8 m, but this should not be presented as a guaranteed 8 m suction lift under every site condition. Xylem notes that maximum delivery varies with geodetic suction lift and specifies conditions for its published curves.
Actual suction performance is influenced by water temperature, elevation, suction-pipe diameter, pipe length, fittings, foot valve condition and air leakage.
For practical installations, keeping the pump as close to the water source as reasonably possible is preferable.
Applications of Lowara BGM3
The BGM3 can be considered for water distribution, pressure boosting, irrigation, rainwater collection, washing systems and suitable residential/commercial water-transfer applications, subject to its hydraulic operating range.
Lowara BGM3 Pump Supplier in UAE
DXB Solutions LLC supplies Lowara BGM3 pumps in Dubai and across the UAE for suitable water-transfer, irrigation and pressure-boosting applications.
For pump selection, provide the required flow rate, total dynamic head, suction lift and application so that the required duty can be checked against the Lowara BGM3 performance curve.
Related Products
