The Ebara 3D 32-160/2.2 is a single-stage end suction centrifugal pump designed for water supply, HVAC, pressure boosting, irrigation and industrial water-transfer applications. It belongs to Ebara’s standardized 3D centrifugal pump series and features an EN 733 design, cast-iron pump casing and stainless-steel impeller.
DXB Solutions LLC supplies Ebara 3D 32-160/2.2 pumps in UAE for commercial buildings, HVAC systems, water supply, irrigation and industrial pumping applications.
The Ebara 3D 32-160/2.2 combines a robust centrifugal pump design with a 2.2 kW (3 HP) motor. The model uses a two-pole motor operating at approximately 2900 rpm at 50 Hz.
Ebara data for the 32-160/2.2 shows approximately 35.4 m head at 6 m³/h, decreasing to approximately 25.5 m at 20 m³/h.
Ebara 3D 32-160/2.2 for HVAC Systems
The Ebara 3D 32-160/2.2 can be selected for suitable HVAC, chilled-water and building-services applications where the required operating point falls within the pump’s performance range.
Pump selection should consider the required water flow, total dynamic head, pipe losses and system operating conditions.
Water Supply & Pressure Boosting
The Ebara 3D 32-160/2.2 can also be used for appropriate water transfer and pressure-boosting systems.
Its higher head compared with the 1.5 kW version makes the 2.2 kW model suitable where the system requires greater pressure at a comparable flow rate. For example, at around 15 m³/h, published data shows approximately 29.8 m head for the 2.2 kW model, compared with approximately 21.3 m for the 1.5 kW model.
Irrigation Applications
The Ebara 3D Series is also specified for agriculture, irrigation and pressurization applications.
The appropriate model should always be selected according to the irrigation system’s required flow and pressure rather than motor power alone.
Industrial Water Transfer
The robust end suction centrifugal design makes the Ebara 3D 32-160/2.2 suitable for various commercial and industrial water-transfer duties where the pumped liquid and operating conditions are compatible with the pump materials.
Ebara 3D 32-160/2.2 Supplier in UAE
DXB Solutions LLC supplies Ebara 3D 32-160/2.2 end suction pumps in Dubai and across the UAE for HVAC, water supply, irrigation, pressure boosting and industrial pumping applications.
Related Products