The Ebara 3D 32-160/1.5 is a single-stage end suction centrifugal pump designed for water supply, HVAC, pressure boosting, irrigation and industrial water-transfer applications. The model belongs to Ebara’s standardized 3D Series and uses an EN 733 design.
DXB Solutions LLC supplies Ebara 3D 32-160/1.5 pumps in UAE for residential, commercial and industrial pumping requirements.
Ebara 3D 32-160/1.5 Pump Features
The pump combines a cast-iron casing with an AISI 304 stainless-steel impeller. The 3D Series also incorporates a back pull-out construction, simplifying maintenance because the rotating assembly can be removed without disconnecting the main pump casing from the pipework
Ebara technical selection data for this model shows a maximum flow of approximately 20 m³/h, with published duty points of about 27.5 m at 6 m³/h, 21.3 m at 15 m³/h and 16.4 m at 20 m³/h.
Important: the 1.5 kW motor equals approximately 2 HP, not 3 HP. Ebara’s technical documentation confirms the 1.5 kW / 2 HP rating.
Applications
The Ebara 3D 32-160/1.5 centrifugal pump can be selected for suitable HVAC and chilled-water systems, water supply, pressure boosting, irrigation, industrial water transfer and washing systems. The correct operating point should always be checked against the Ebara performance curve.
Ebara 3D 32-160/1.5 for HVAC Systems
The pump’s centrifugal design makes it suitable for appropriately designed heating, ventilation and air-conditioning water systems. Selection should be based on the required flow, total dynamic head, water temperature and system characteristics.
Ebara 3D 32-160/1.5 for Water Supply
For water-transfer and pressure-boosting applications, the pump can provide up to approximately 20 m³/h within its published operating range. Actual flow depends on the system resistance and operating head rather than motor power alone.
Ebara 3D 32-160/1.5 Supplier in UAE
DXB Solutions LLC supplies Ebara 3D 32-160/1.5 end suction pumps in Dubai and across the UAE for HVAC, water supply, irrigation, pressure boosting and industrial applications.
Provide the required flow rate (m³/h), total head (m) and application for suitable pump selection.
Related Products